Start

These labs were mostly inspired from Nick Russo's CCIE-SPv4 guide. Note that like usual, the CSR1000v interfaces have increased by one. (What was Gi1 in the original lab is now Gi2, etc). Outputs will still reflect the old Gi1 interface, but config solutions will reflect the correct Gi2 interface.

To begin, run the following command on your containerlab machine:

cd ccie-spv5.1-labs/
containerlab deploy -t l2vpn/l2vpn.clab.yml --reconfigure

Once all nodes are started, run the following command to transfer the config files to all nodes. These files will be used to change between startup configs for subsequent labs.

python3 transfer_configs_to_nodes.py

The script will prompt you for a directory name. Enter "l2vpn". This may take a few minutes to complete.

Use the MTPutty session file located in l2vpn/l2vpn_putty_sessions.xml to quickly setup your SSH sessions to the nodes. Go to Server - Import Tree and browse for the file.

When you are done with the lab, use the following command to wipe it:

containerlab destroy -t l2vpn/l2vpn.clab.yml